Long-term Process Research Articles

Assessing the role of socio-demographic characteristics, social support and formal disaster assistance in predicting the subjective recovery of flood survivors in Pakistan

ABSTRACT This article investigates the effects of socio-demographic characteristics of the 2010 flood victims, their flood exposure, and social and formal support on post-flood subjective recovery. It seeks to illuminate the factors best correlating with life recovery feelings of the respondents. Regression analysis of survey data showed that period of return to home, annual income, family size, material damage, and social support significantly correlated with the life recovery of respondents. More specifically, the period of return to home and material loss had a negative connection with life recovery feelings of flood victims while the annual income of the respondents, family size, and social support had a positive correlation on their life recovery feelings. Analysis also revealed that formal disaster support had a very negligible correlation with life recovery. However, social support helped to lessen the negative effects of material damage on the life recovery feelings of the survivors. The correlation of annual income with life recovery feelings remained almost constant and significant in all the regression models, showcasing the importance of personal resources to recover from disaster. The study concludes that although both social and formal support are pivotal for post-flood subjective recovery, they face serious limitations. More nuanced longitudinal studies are required to understand the contours of long-term life recovery process.

Verbal learning in frontal patients: area 9 is critical for employing semantic strategies

Abstract Background Learning is a long-term memory process, influenced by working memory control processes, including recognition of semantic properties of items by which subjects generate a semantic structure of engrams. Aim The aim of the study is to investigate the verbal learning strategies of Parkinson’s disease patients. Methods Thirty patients with idiopathic Parkinson’s disease and thirty normal control subjects were tested with a multi-trial word list learning, under two conditions: without cue and then with an explicit cue suggesting the categories in the list, respectively. Results and conclusions In comparison to healthy control subjects, parkinsonian patients recalled fewer words and achieved a reduced number of categorical clusters; strategical cue did not improve their performance. This suggests, besides a difficulty in identifying the correct learning strategy, a deficit in working memory, which undermines the strategy implementation. We hypothesize that this function pertains to the dorsolateral cognitive circuit of the extrapyramidal system.

High barrier polyesters based on 2,5-furandicarboxylic acid and disulfide bond: Smart degradation induced by low concentrations of redox reagent

Bio-based and biodegradable polymers opens up opportunities to overcome resource depletion and plastic pollution. However, the degradation mechanism based on ester bond breakage makes it difficult to achieve controllable degradation induced by external stimuli. In this work, we present a new 2,5-furandicarboxylic acid-based copolyesters (PBFDi) by partially replacing carbon–carbon backbones with disulfide bonds and discuss the influence of disulfide bonds on thermal stability, crystallization behavior, mechanical and barrier properties of polyesters. They could maintain stable for 1 h at processing temperatures of 220 °C, meeting the needs of long-term melt processing. The asymmetric structure of the furan ring and the slower free rotation of disulfide bonds help restrict the mobility of chains and obstruct gas permeation, resulting in 9.3–126.7 times increase in O2 barrier than commercial PBAT. With the introduction of small amount (≤40 %) of disulfide bond units, the hydrolysis rate is relatively slow and can maintain stable during storage and use. As expected, the copolyesters show redox dual-responsive degradation. Even at low concentrations (0.01 M and 0.1 M) of H2O2, the transition from hydrophobicity to hydrophilicity can be achieved, expected to accelerate the hydrolysis of PBFDi. The fast cleavage of disulfide bonds induced by DTT could be influenced by the copolymerized FDCA units. Lastly, the redox dual-responsive mechanism is elucidated, and how the rigid FDCA co-monomers affect the redox dual responsiveness is also clarified.

Effect of a process interruption on the mechanical properties of AlSi10Mg components produced by laser powder bed fusion (PBF-LB/M)

AbstractDue to various causes, process interruptions during powder bed fusion of metal with laser beam (PBF-LB/M) can occur. This can be performed deliberately, e.g. as part of sensor integration or hybrid manufacturing. However, unplanned interruptions are also possible, for example, due to a power outage. In particular, long-term interruptions may result in significant quality losses, making it necessary to cancel the build job. Depending on the extent of the print job and the location of the interruption, this can mean a major economic loss. Most of the previous studies have found only minor reduction of the mechanical properties. However, these studies often dealt with the effect of planned interruptions and relatively short interruptions of about 1 h. Significantly longer interruption times are also realistic, especially when they occur overnight or during weekends. The aim of this study is to investigate the effects on the component quality of a process interruption when the manufacturing process is continued several hours after the interruption. For this purpose, the effects of different interruption durations (1, 4, 10 and 16 h) on the microstructure, hardness, tensile strength and fatigue properties of the PBF-LB/M-fabricated components made of AlSi10Mg were investigated. In addition, the layer shift resulting from the interruption is measured and described geometrically. The results show that for AlSi10Mg specimens in which the layer shift was removed and which are not highly loaded, an unplanned long-term process interruption up to 10 h does not result in a significant loss of quality under the considered conditions. Furthermore, it is apparent that the procedure for restarting the process is very important for the resulting component quality.

The Effect of Water during the Compaction Process on Surface Characteristics of HMA Pavement.

During the compaction process of HMA pavement, it is common to spray cold water on the wheel of a road roller to prevent the mixture from sticking to the wheel, which might deteriorate the bonding strength between the asphalt binder and aggregate, and consequently lead to surface polishing of the pavement. This paper aims to demonstrate whether the water used during the compaction process affects the surface performance of HMA pavement. In this study, the black pixel ratio and mass loss ratio were used to evaluate the water effect on the surface performance of asphalt pavement, considering the water consumption, molding temperature and long-term ageing process. The test results indicated that the water used during the compaction process would increase the risk of surface polishing of HMA pavement. This adverse effect became more significant if the HMA samples were prepared using greater water consumption, a greater molding temperature and a long-term ageing process. Moreover, there exists a certain correlation between the black pixel ratio and mass loss ratio, and their relationships were demonstrated by the experimental results in this study. It is recommended that further research concentrates on the influencing mechanism and the treatment strategy for the adverse effect caused by the water used during the compaction process. The use of more types of asphalt binders, aggregate and methodologies is also recommended in further studies.

Optimizing the sulfur-resistance and activity of perovskite oxygen carrier for chemical looping dry reforming of methane

Perovskite oxides has been attracted much attention as high-performance oxygen carriers for chemical looping reforming of methane, but they are easily inactivated by the presence of trace H2S. Here, we propose to modulate both the activity and resistance to sulfur poisoning by dual substitution of Mo and Ni ions with the Fe-sites of LaFeO3 perovskite. It is found that partial substitution of Ni for Fe substantially improves the activity of LaFeO3 perovskite, while Ni particles prefer to grow and react with H2S during the long-term successive redox process, resulting in the deactivation of oxygen carriers. With the presence of Mo in LaNi0.05Fe0.95O3−σ perovskite, H2S preferentially reacts with Mo to generate MoS2, and then the CO2 oxidation can regenerate Mo via removing sulfur. In addition, Mo can inhibit the accumulation and growth of Ni, which helps to improve the redox stability of oxygen carriers. The LaNi0.05Mo0.07Fe0.88O3−σ oxygen carrier exhibits stable and excellent performance, with the CH4 conversion higher than 90% during the 50 redox cycles in the presence of 50 ppm H2S at 800 °C. This work highlights a synergistic effect in the perovskite oxides induced by dual substitution of different cations for the development of high-performance oxygen carriers with excellent sulfur tolerance.

Charting new paradigms for CAR-T cell therapy beyond current Achilles heels

Charting new paradigms for CAR-T cell therapy beyond current Achilles heels

Electrochemical evolution of size-controlled Pd nanocubes during long-term electrocatalytic hydrodechlorination reaction

Electrocatalytic hydrodechlorination (EHDC) emerges as a promising technology for remediating chlorinated organic pollutants, garnering considerable attention. However, the long-term performance evolution of EHDC, specifically its size-dependent aspect, remains relatively unexplored. This work aims to address this gap by examining Pd nanocubes with controlled sizes of 7.2 nm for Pd Cube-S, 10.6 nm for Pd Cube-M, and 14.7 nm for Pd Cube-L. The specific activity and electrochemical turnover frequency (TOF) of these Pd cubes increased with particle size, a pattern that is inverse to the trend of mass activity. Although Pd Cube-S initially demonstrated heightened EHDC efficiency, a long-term examination over multiple EHDC cycles revealed that Pd Cube-L exhibited escalating mass activity (from 2.10 to 3.11 min−1 g−1 after 5 cycles) and maintained stability over 180 h of continuous electrolysis. This phenomenon arose from structural reorganization of Pd cubes occurring during the EHDC cycles, leading to an expansion of the electrochemically specific surface area. Such structural reorganization brought about more enhancements in large-sized Pd cubes, whereas Pd Cube-S suffered more from particle agglomeration. Consequently, by fine-tuning the particle size, this work provided valuable insights into the long-term EHDC process, offering practical implications for enhancing the durability of Pd nanocatalysts.

Study of long-term in-orbit pressure control of liquid krypton cryogenic storage tank

Due to its high specific impulse, low toxicity, contamination, safety, and cost, krypton has gradually replaced other propellants as the primary choice for electric thrusters on deep-space exploration and large-orbit transfer missions with long-range, long-duration, and large-thrust requirements. However, due to the cryogenic propellant itself having a low boiling point, controlling the pressure change of krypton cryogenic propellant during the process of long-term cryogenic storage has emerged as one of the most important issues that must be resolved and proven to achieve non-destructive storage of cryogenic propellant. This paper examines the necessity and viability of a cryogenic gas propellant liquefaction storage scheme and quantifies the effectiveness of tank pressure control of the supercooled liquid krypton injection mixing scheme to solve the problem at present. Its purpose is to offer scheme examples for the design of a krypton thruster propellant storage unit and the in-tank pressure control during the long-term application process.

One-step approach by enterolithotomy as surgical treatment of biliary ileus associated with bridle: case report and literature review

Gallstone ileus is a rare cause of intestinal obstruction, more common in adults and in the context of late complications due to gallbladder stones. The pathophysiology describes long-term inflammatory processes of the gallbladder, with biliodigestive fistula development and passage of the gallstone into the intestine, impacting the terminal ileum in most cases. It manifests with data of intestinal obstruction in patients with a chronic history of gallbladder lithiasis. The ideal imaging study is a computed tomography (CT) scan of the abdomen to identify pneumobilia, intestinal obstruction and the lithiasis impacting on the bowel. The surgical approach depends on the context of each patient through laparoscopy or laparotomy in order to perform enterotomy and extraction of the stone or by performing also the management of the fistula and cholecystectomy at the same surgical time. Management must be individualized for each patient. We present the case of a patient in her tenth decade of life with a history of recurrent biliary colic without management, who was admitted to the general surgery department with data of probable intestinal occlusion. Imaging studies were performed, with radiographic evidence of distension of the small bowel loops and tomography with findings suggestive of biliary ileus. Due to the clinical context and comorbidities of the patient, laparotomy with enterotomy and extraction of the stone was performed.

Evolution of submarine canyons and hanging-wall fans: insights from geomorphic experiments and morphodynamic models

Abstract. Tectonics play a significant role in shaping the morphology of submarine canyons, which form essential links in source-to-sink (S2S) systems. It is difficult, however, to investigate the resulting morphodynamics over the long term. For this purpose, we propose a novel experimental approach that can generate submarine canyons and hanging-wall fans on continuously evolving active faults. We utilize morphometric analysis and morphodynamic models to understand the response of these systems to fault slip rate (Vr) and inflow discharge (Q). Our research reveals several key findings. Firstly, the fault slip rate controls the merging speed of submarine canyons and hanging-wall fans, which in turn affects their quantity and spacing. Additionally, the long profile shapes of submarine canyons and hanging-wall fans can be decoupled into a gravity-dominated breaching process and an underflow-dominated diffusion process, which can be described using a constant-slope relationship and a morphodynamic diffusion model, respectively. Furthermore, both experimental and simulated submarine canyon–hanging-wall fan long profiles exhibit strong self-similarity, indicating that the long profiles are scale independent. The Hack's scaling relationship established through morphometric analyses serves as an important link between different scales in S2S systems, bridging laboratory-scale data to field-scale data and submarine-to-terrestrial relationships. Lastly, for deep-water sedimentary systems, we propose an empirical formula to estimate fan volume using canyon length, and the data from 26 worldwide S2S systems utilized for comparison show a strong agreement. Our geomorphic experiments provide a novel perspective for better understanding of the influence of tectonics on deep-water sedimentary processes. The scaling relationships and empirical formulas we have established aim to assist in estimating volume information that is difficult to obtain during long-term landscape evolution processes.

Transient simulation of conjugate heat transfer of kerosene with thermal oxidative and surface coking reactions at a supercritical pressure

The regenerative cooling technology in aerospace applications often involves supercritical-pressure heat transfer of a hydrocarbon fuel, in which thermal oxidative reactions of the fuel would lead to surface coke accumulation on the cooling channel wall. In this paper, the long-term transient conjugate heat transfer of kerosene has been numerically investigated in a circular mini tube at a supercritical pressure of 3 MPa. The modified chemical mechanism and kinetics of thermal oxidative and surface coking reactions of kerosene are proposed, which, with an additional surface reaction, are capable of treating large coke deposition in regions with sharp temperature gradients. Transient surface coke accumulation and its effect on heat transfer are handled by a dynamic mesh technique. A series of numerical studies are conducted to elucidate the influences of surface heat flux, dissolved oxygen mass fraction, inlet fuel mass flow rate, and coke layer thermal conductivity on the supercritical-pressure heat transfer and thermal oxidative reactions. The effects of different reaction pathways on surface coke accumulation are analyzed comprehensively, and it is revealed that the oxygen-consuming surface coke deposition is initiated only at the high fuel temperature at around 590 K. The present numerical results would enhance fundamental understanding of the long-term transient heat transfer process of a hydrocarbon fuel at supercritical pressures in the regenerative cooling applications.

Elastic and Self-Healing Copolymer Coatings with Antimicrobial Function.

The revolutionary self-healing function for long-term and safe service processes has inspired researchers to implement them in various fields, including in the application of antimicrobial protective coatings. Despite the great advances that have been made in the field of fabricating self-healing and antimicrobial polymers, their poor transparency and the trade-off between the mechanical and self-healing properties limit the utility of the materials as transparent antimicrobial protective coatings for wearable optical and display devices. Considering the compatibility in the blending process, our group proposed a self-healing, self-cross-linkable poly{(n-butyl acrylate)-co-[N-(hydroxymethyl)acrylamide]} copolymer (AP)-based protective coating combined with two types of commercial cationic antimicrobial agents (i.e., dimethyl octadecyl (3-trimethoxysilylpropyl) ammonium chloride (DTSACL) and chlorhexidine gluconate (CHG)), leading to the fabrication of a multifunctional modified compound film of (AP/b%CHG)-grafted-a%DTSACL. The first highlight of this research is that the reactivity of the hydroxyl group in the N-(hydroxymethyl)acrylamide of the copolymer side chains under thermal conditions facilitates the "grafting to" process with the trimethoxysilane groups of DTSACL to form AP-grafted-DTSACL, yielding favorable thermal stability, improvement in hydrophobicity, and enhancement of mechanical strength. Second, we highlight that the addition of CHG can generate covalent and noncovalent interactions in a complex manner between the two biguanide groups of CHG with the AP and DTSACL via a thermal-triggered cross-linking reaction. The noncovalent interactions synergistically serve as diverse dynamic hydrogen bonds, leading to complete healing upon scratches and even showing over 80% self-healing efficiency on full-cut, while covalent bonding can effectively improve elasticity and mechanical strength. The soft nature of CHG also takes part in improving the self-healing of the copolymer. Moreover, it was discovered that the addition of CHG can enhance antimicrobial effectiveness, as demonstrated by the long-term superior antibacterial activity (100%) against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria and the antifouling function on a glass substrate and/or a silica wafer coated by the modified polymer.

New avenues for potentially seeking microbial responses to climate change beneath Antarctic ice shelves.

Several efforts have been undertaken to predict the response of microbes under climate change, mainly based on short-term microcosm experiments under forced conditions. A common concern is that manipulative experiments cannot properly simulate the response of microbes to climate change, which is a long-term evolutionary process. In this proof-of-concept study with a limited sample size, we demonstrate a novel approach yet to be fully explored in science for accessing genetic information from putative past marine microbes preserved under Antarctic ice shelves before the industrial revolution. This potentially allows us estimating evolutionary changes as exemplified in our study. We advocate for gathering a more comprehensive Antarctic marine ice core data sets across various periods and sites. Such a data set would enable the establishment of a robust baseline, facilitating a better assessment of the potential effects of climate change on key genetic signatures of microbes.

Agate Mineralization in Paleoproterozoic Organic Carbon-Rich Sedimentary Rocks of the Onega Basin (NW Russia): Insights into Genesis

In this contribution, we present the results of mineralogical investigation of the agates in Paleoproterozoic organic carbon-rich sedimentary rocks within the Onega Basin (Fennoscandian shield, Russia) aimed at reconstructing the agate-forming processes. Optical and scanning electron microscopy, EDS microanalysis, thermal analysis, X-ray powder diffraction, Raman spectroscopy, and carbon isotope analysis were used for the study. Three main varieties of agates differing in morphology and texture were identified, including concentrically zoned nodules, fine-banded, and carbon-rich moss agates. Mineralogical evidence indicates the participation of hydrothermal fluids in agate formation. Concentrically zoned nodules could be formed due to the dissolution of carbonate concretions in the organic carbon-rich siltstones and their silicification as a result of late hydrothermal processes. Fine-banded vein agates occur in stockworks crosscutting organic carbon-rich rocks and are widely accompanied by sulfides, selenides, carbonates, sulfates, and iron oxides. Carbonaceous matter in moss agates is present as poorly ordered carbon and is characterized by a low δ13Corg value (−25.64‰), suggesting a biogenic origin. Raman spectroscopy data showed an elevated amount of moganite besides alpha quartz in the concentrically zoned nodules compared to other agate varieties, indicating different ages of the mineralization processes. We suggest that the revealed varieties of agates were formed at different stages of long-term hydrothermal processes occurring in the Onega Basin.

Vertical distribution of arsenic and bacterial communities in calcareous farmland amending by organic fertilizer and iron-oxidizing bacteria: Field experiment on concomitant remediation

The migration and transformation mechanisms of arsenic (As) in soil environments necessitate an understanding of its influencing processes. Here, we investigate the subsurface biogeochemical transformation of As and iron (Fe) through amended in the top 20 cm with iron oxidizing bacteria (FeOB) and organic fertilizer (OF). Our comprehensive 400-day field study, conducted in a calcareous soil profile sectioned into 20 cm increments, involved analysis by sequential extraction and assessment of microbial properties. The results reveal that the introduction of additional OF increased the release ratio of As/Fe from the non-specific adsorption fraction (136.47 %) at the subsoil depth (40–60 cm), underscoring the importance of sampling at various depths and time points to accurately elucidate the form, instability, and migration of As within the profile. Examination of bacterial interaction networks indicated a disrupted initial niche in the bottom layer, resulting in a novel cooperative symbiosis. While the addition of FeOB did not lead to the dominance of specific bacterial species, it did enhance the relative abundance of As-tolerant Acidobacteria and Gemmatimonadetes in both surface (39.2 % and 38.76 %) and deeper soils (44.29 % and 23.73 %) compared to the control. Consequently, the amendment of FeOB in conjunction with OF facilitated the formation of poorly amorphous Fe (hydr)oxides in the soil, achieved through abiotic and biotic sequestration processes. Throughout the long-term remediation process, the migration coefficient of bioavailable As within the soil profile decreased, indicating that these practices did not exacerbate As mobilization. This study carries significant implications for enhancing biogeochemical cycling in As-contaminated Sierozem soils and exploring potential bioremediation strategies. Environmental implicationThe long-term exposure of sewage irrigation has potential adverse effects on the local ecosystem, causing serious environmental problems. Microorganisms play a vital role in the migration and transformation of arsenic in calcareous soil in arid areas, which highlights the necessity of understanding its dynamics. The vertical distribution, microbial community and fate of arsenic in calcareous farmland soil profile in northwest China were studied through field experiments. The results of this work have certain significance for the remediation of arsenic-contaminated soil in arid areas, and provide new insights for the migration, transformation and remediation of arsenic in this kind of soil.

Ice chemistry modeling of active phase comets: Hale–Bopp

We present a chemical kinetics model of the solid-phase chemical evolution of a comet, beginning with a long period of cold-storage in the Oort Cloud, followed by five orbits that bring the comet close to the Sun. Current orbital parameters for Hale–Bopp are used for all orbits. The chemical model is based on an earlier treatment (Garrod 2019) that considered only the cold-storage phase, and which was based on the interstellar ice chemical kinetics model MAGICKAL. The comet is treated as 25 chemically distinct layers, whose thicknesses increase with depth; each layer has a dust component, and the chemical network includes a further 200 atomic/molecular species. The new model includes several key updates to the previous treatment: (i) Time- and depth-dependent temperature profiles based on heat transfer according to heliocentric distance; (ii) a rigorous treatment of back-diffusion (random walk) for species capable of diffusing through the thick bulk-ice layers; (iii) adoption of recent improvements in the kinetic treatment of nondiffusive chemical reaction rates in the ice and on the ice surface. Starting from an initially simple ice composition, interstellar UV photons drive a rapid chemistry in the upper micron of material, but diminished by absorption of the UV by the dust component. Galactic cosmic rays (GCRs) drive a much slower chemistry in the deeper ices over the long cold-storage period, to depths on the order of 10 m. The first solar approach drives off the upper layers of ice material via thermal desorption and/or dissociation (the model does not include a treatment for the more complex cometary outbursts), bringing closer to the surface the deeper material that previously underwent long-term processing by GCRs. Subsequent orbits are more uniform in their chemical behavior after the upper layers are lost. Loss of molecular material leads to concentration of the dust in the upper layers, with a large dust fraction extending to depths on the order of 10 cm after all orbits are complete. Substantial quantities of complex organic molecules (COMs) are formed in the upper 10 m during the cold storage phase, with some of this material released during solar approach; however, their abundances with respect to water appear too low to account for the observed gas-phase values for comet Hale–Bopp, indicating that the majority of complex molecular material observed, at least in comet Hale–Bopp, is an inheritance of primordial material.

The last 1100 years of activity of La Fossa caldera, Vulcano Island (Italy): new insights into stratigraphy, chronology, and landscape evolution

A detailed study of past eruptive activity is crucial to understanding volcanic systems and associated hazards. We present a meticulous stratigraphic analysis, a comprehensive chronological reconstruction, thorough tephra mapping, and a detailed analysis of the interplay between primary and secondary volcanic processes of the post-900 AD activity of La Fossa caldera, including the two main systems of La Fossa volcano and Vulcanello cones (Vulcano Island, Italy). Our analyses demonstrate how the recent volcanic activity of La Fossa caldera is primarily characterized by effusive and Strombolian activity and Vulcanian eruptions, combined with sporadic sub-Plinian events and both impulsive and long-lasting phreatic explosions, all of which have the capacity to severely impact the entire northern sector of Vulcano island. We document a total of 30 eruptions, 25 from the La Fossa volcano and 5 from Vulcanello cones, consisting of ash to lapilli deposits and fields of ballistic bombs and blocks. Volcanic activity alternated with significant erosional phases and volcaniclastic re-sedimentation. Large-scale secondary erosion processes occur in response to the widespread deposition of fine-grained ash blankets, both onto the active cone of La Fossa and the watersheds conveying their waters into the La Fossa caldera. The continuous increase in ground height above sea level, particularly in the western sector of the caldera depression where key infrastructure is situated, is primarily attributed to long-term alluvial processes. We demonstrate how a specific methodological approach is key to the characterization and hazard assessment of low-to-high intensity volcanic activity, where tephra is emitted over long time periods and is intercalated with phases of erosion and re-sedimentation.

The efficiency of dodecafluoro-2-methylpentan-3-one in suppressing NCM 811 lithium-ion battery fire

With the increase in the specific energy of lithium-ion batteries (LIBs), fire accidents occur more frequently; however, the effective and clean suppression of LIB fires remains a challenge. In the present work, the efficiency of dodecafluoro-2-methylpentan-3-one (C6F12O) in suppressing high energy density (HED) ternary LIB fires is experimentally investigated. It is found that C6F12O can efficiently extinguish the HED battery and its module fire. As the flow rate increases, the extinguishment time decreases and the peak temperature decreases, but the cooling efficiency for the long-term process is reduced. When the C6F12O spray can completely cover the thermal runaway (TR) area, its extinguishing and cooling effect is the best. For the HED module, the application of C6F12O effectively increases the TR trigger temperature, reduces the TR peak temperature, and decreases heat production. The application of water mist enhances the cooling of extinguished LIBs, the combination of C6F12O and water mist extends the TR propagation time of the fully charged LIB module to 1.4 times that without suppression, and the total TR heat production is reduced by 1423.1 kJ. These results provide guidance for the design of inhibitor volume fractions for HED LIB fires.

Historical memory as a mediation factor for resolving irredentical conflicts in the world

The article analyzes historical memory in the context of irredentical conflicts. Emphasis is placed on the role of historical memory as a social phenomenon and the peculiarities of the historical policy formation as a factor in negotiation processes when applying the mediation method. The conflicts that arise as a result of the implementation of irredentism as a policy of actors (state, party or socio-political movement) with the aim of integrating ethnic groups into one ethnos within the framework of a single state are extremely complicated, since the main appeal is to the history of the formation of the ethnos. The potential threats that appear before the mediator are revealed, as historical memory is explicated simultaneously in the space of diachronic communication of society as a distant in time connection of generations and synchronous communication as mutual relations in real time, based on the strategy of common destiny for the sake of the future. It is emphasized that cultural communication appeals to supra-individual memory and contains both rational components in the form of historical knowledge and irrational ones (myths, legends, symbols, etc.), and conflicts based on irredentism primarily determine the phenomenon of "common history" , that is, long-term processes of ethno-national interaction, which are crystallized in various forms of the collective unconscious. Consideration of these aspects is essential for mediation.